Toyota Unveils Silicon Carbide Semiconductor Trial

Cameron Aubernon
by Cameron Aubernon

Toyota unveiled its plans Wednesday to trial a new hybrid system using silicon carbide power semiconductors that could find its way into hybrids and EVs.

The trial will compare the new silicon carbide semiconductors with silicon units currently found in many a hybrid’s, FCV’s and EV’s power control unit, which are linked to a 20 percent loss in overall electric power. The aim is to increase powertrain efficiency by mitigating said losses through the new semiconductors.

The test subjects will be a Camry hybrid prototype and a fuel-cell bus. The bus trial began in early January, when Toyota started data collection on a setup featuring SiC diodes in the FCV’s voltage step-up converter. Meanwhile, the Camry — whose SiC components are in both the hybrid’s voltage step-up and inverter — will hit the road for a year beginning early next month. Both tests are being carried out in Toyota City, Japan.

Toyota hopes to have the SiC technology — developed in a partnership with Denso Corporation and Toyota Central R&D Labs, Inc. — ready for practical use as soon as possible.



Cameron Aubernon
Cameron Aubernon

Seattle-based writer, blogger, and photographer for many a publication. Born in Louisville. Raised in Kansas. Where I lay my head is home.

More by Cameron Aubernon

Comments
Join the conversation
2 of 21 comments
  • Honda_lawn_art Honda_lawn_art on Jan 30, 2015

    Dr. Hibbert: 'Was it carbon based, or silicone based? Homer: 'The second one, xylophone.'

  • Jdash1972 Jdash1972 on Jan 30, 2015

    In an industrial application a "drive" is used to operate a squirrel cage induction motor at different speeds. The same motor connected to normal 60Hz AC power will run at a speed determined by the number of poles the motor was built with. 7200 / number of poles = motor rpm. Most motors are 3600, 1800 and 1200, slower motors with more poles are generally less common. An AC variable frequency drive takes the incoming 60Hz AC power and rectifies and filters it using a capacitor bank, to a single phase DC bus. Transistors are used to reconvert this dC power to AC of any desired frequency. You observe a voltage to frequency ratio when driving the motor so the operational rpm range of the motor is limited. This is exactly what's being done in a Tesla, except they start with DC from a battery. Those power transistors, sometimes called IGBT's or insulated gate bipolar transistors, rapidly switch the power to synthesize a pure sine wave at a frequency to achieve the desire motor rpm. Every step in his conversion has losses, just as the transistors have a voltage drop across their junctions and dissipate this power as heat. So big heat sink and whatever cleaver means to keep he electronics cool. Medium voltage drives have huge losses, the air conditioner is as large as the drive itself in most cases. This is what I do for a living.

  • MaintenanceCosts It's not a Benz or a Jag / it's a 5-0 with a rag /And I don't wanna brag / but I could never be stag
  • 3-On-The-Tree Son has a 2016 Mustang GT 5.0 and I have a 2009 C6 Corvette LS3 6spd. And on paper they are pretty close.
  • 3-On-The-Tree Same as the Land Cruiser, emissions. I have a 1985 FJ60 Land Cruiser and it’s a beast off-roading.
  • CanadaCraig I would like for this anniversary special to be a bare-bones Plain-Jane model offered in Dynasty Green and Vintage Burgundy.
  • ToolGuy Ford is good at drifting all right... 😉
Next